Where is the horn relay located on a 4 cylinder Toyota camry?
wireing of starter relay
need a diagram and instructions on changing a water pump on a 1992 ford tempo 4 cylinder
how to replace the thermal switch relay on a 1992 Honda civic lx
What relay are you trying to replace? (what does it operate?) horn
Nope, sorry bro
how do you replace ignition switch on a 1992 Chevy cavalier 2.2 4 cylinder
TAKE A YAHOO SEARCH JUST TYPE 4 CYLINDER MOTER PICTURES.
Where is the thermostat located and how do you replace it on 1992 toyota camry 4 cylinder ingine
I found the answer at http://autorepair.about.com/library/faqs/b1103f.htm
Pay someone to do it.
if it is a 4 cylinder the number one is the first cylinder behind the belts and all that stuff. If it is a v6 the number 1 cylinder is the first cylinder behind the belts on the bank closest to the front of the car.
No, you cannot.
what kind of fule pump is in a 1992 ford tempo
About 1 hour.
be more specific.. replace pads..?? replace hose..?? repair master cylinder..??
No you don't have to drop the transmission in order to replace the slave cylinder, but be careful because it can easily be stripped.
If you need to replace the slave cylinder it is located in the bell housing and the trans has to be removed. The clutch master cylinder is located on the firewall on the drivers side
If the lights come on but do not flash replace the flasher relay.
fuse panel diagrame for 1992 ford tempo fuse box
from a 1992 what please? in regards to your serpentine, the engine should, if your lucky have a diagram of how it goes.
special tools are required to do this job.slide hammers impact tools.yhis is not a job for diy!!
The fuel pump relay is actaully located on the drivers side strut on the inside of the hood located next to the battery, it is about 6 x 4 x 2 and is black and has a big plug pluggd into it with about 12 to 15 wires coming out of it, that is actaully the body control module, but the fuel pump relay is part of it and you have to replace the whole little black box, not the wiring
If it has the 4.3 engine the relay is located under the hood, on the firewall, drivers side, between the master cylinder and the fender.
I have not seen a way to do it without removing the steering wheel (and airbag).