You must stop the headlight in the up position. Sometimes you have to do this manually, with the over-ride on the headlamp motor.It's best to do this with the hood up. There are two screws in front of the headlamp on the bottom that must be removed. Then turn the assembly to the partially down position to remove two more screws; one on either side toward the rear of the assembly. This will enable you to remove the cover. Then simply remove the screws that hold the chrome frame around the bulb and replace. Reverse procedure for install. CAUTION: be sure not to mistake the adjustment screws for the retaining screws, as your headlamps will be out of allignment.
when the headlight is up..or {on position}..it can be changed.. !!!!
On a 1999 C5 corvette manually put the flip up headlight in the up position, remove the plastic headlight trim around the headlight with three screws... put your bare arm under the raised headlight and remove the turn signal bulb with a careful twist.
== ==
== ==
There are two clips on the wall that holds the headlights. Push the clips away and pull the headlight housing out.
== ==
== ==
== ==
== ==
more then likely w/ no more info then is provided there is a silver rod on top of the headlight pod you slide to the side then the whole light will come out and you can replace the bulb and reinstall.
Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.
the headlight assembly needs to come out in order to replace the bulb.
The headlight fuse located on a 1995 Chevy Tahoe is under the hood. It is located in the fuse box on the passenger side.