1. Open the hood. Unplug the connector while depressing the lock release. if the connector is tight,wiggle it. 2.Turn the bulb and remove it.Install the new bulb and install the connector. To install a bulb, align the tabs of the bulb socket with the cutouts of the mounting hole. Aiming is not necessary after replacing the bulb.When aiming adjustment is necessary,contact your Toyata dealer
I have a 93 camry. I don't think there was too much difference between the headlight-changing process of the 93 and the 94. There is hardly any ROOM to remove the headlight bulb housing. It is really tight in there. Is there any way to allow the entire headlight assembly to be loosened and shifted forward, allowing more room to change the headlight? Who had some ideas about this? Thank you. Mike B email@example.com
Yes,it is a little tight in there but it can be done without trying to move or loosen anything. If you do loosen anything,now you have a aiming problem. No need to aim if you just change the bulbs. I just changed all 4 of mine to zenon bulbs without any trouble,so take your time as it can be done .