It is quite easy. Identify the bulb that is burned out and unplug it. You have to squeeze the center of the plug to unlock it as you are unplugging it. Once it is unplugged turn the end of the bulb to unlock it and it will come out of its hole. Next plug your new bulb into the plug and place the bulb into the hole where the old bulb came out. Twist the back of the bulb and plug to lock it into place. If all else fails, go to Auto Zone or Oreilly's. They usually will help you put one in at no charge. dj
OR DONT FOLLOW THE GUY ABOVE IF YOU HAVE A High Intensity Discharge lighting system installed in your Accord. The sticker saying shock may result and could be fatal means what it says!
If you have HID lights (like my accord) then dont try and do it yourself. Also they are pre-charged using a 20,000 volt (maybe more) ballast which charges the lights to start.
Dont mess with it if you dont know what you're doing.
The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.
where is the water pump located on 1997 honda accord
The headlight relay switch on a 1987 Honda Accord looks like a small box. The switch is located underneath the engine compartment fuse box.
﻿If you mean bulb, then - 1. Start on the battery (passenger) side of the car even if that light bulb is okay. It will teach you how to do the other side (driver
no because an accord headlight is much more longer than a civic headlight
This just isn't something that you want to do. Remove engine shroud, grill, bumper on the side that you're working on, inner fender fasteners - then you can get to the 4 bolts that hold the headlight assembly in. Did it yesterday - won't do it again. 5 hours :-(
It is located in the fuel tank. The tank must be removed to replace it.
How do you replace the clock on accord 1992
pretty much rotate the gray plastic locking ring, unplug the connector, and pull bulb out. Reverse to install. Do not touch new bulb with fingers or it may crack.
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.