Want this question answered?
Do it the normal way with a florescent bulb
i need to replace the temperature control light bulb on my 2004 silverado.
pull the heater control knob off and located behind is a small capless bulb pull out and then push in new bulb replace knob job done
BIUSx2123_
how do you change a dashboard bulb in a renault clio?
light out on the seat heater switch on passenger side. High low indicator is ok. How do you replace bulb?
By asking acablest to do it.
Remove the strap across the back of the light in the boot. Then unscrew the bolt at the top (with hands as it has a moulded plastic piece on). then unclip the board with the lights on and replace the broken bulb. The bulb uses a bayonet style fixing.
Hi, it is quite difficult to do this. However, here is a tutorial. 1. Take off the heater control unit and centre console 2. Take off the waffle sprocket (you will need a waffle sprocket key to do this) 3. Unplug the bulb 4. Plug in new bulb 5. Replace the waffle sprocket (using the waffle sprocket key) 6. Replace the centre console 7. Replace the heater control unit 8. Job is finished
A light bulb similar to a heater in that they both produce heat when in operation.
take off your dash bezel that stretches from your gages past your radio then remove the heater control box and it will be on the back twist it out and replace your bulb for around $1.00.
take the front panel off where the knob that needs bulb replacement is (it should snap out) then take the screws out and pull on it there's a wire conected to the knob and the bulb at the same time twiste it and pull it out and replace your bulb take the front panel off where the knob that needs bulb replacement is (it should snap out) then take the screws out and pull on it there's a wire conected to the knob and the bulb at the same time twiste it and pull it out and replace your bulb