Cars & Vehicles
Car Stereos and Speakers
DIY Projects

How do you replace the light source in a car stereo?


Top Answer
User Avatar
Wiki User
2005-09-08 02:28:29
2005-09-08 02:28:29

It would help to know what year and model car and if original equipment or after market.

User Avatar

Related Questions

Replacing a car stereo is not a difficult process. All you need to do is take off the face plate, unscrew the radio, and unhook the wires. Then place the new stereo in, hook up the wires, screw the new stereo in, and replace the face plate.

No but you could replace the stereo with a radio/cassette or just add a cassette deck mounted next to it.

Any car stereo installation merchant is a reliable source for buying and installing your car alarm.

It is for the dial light or the statiod memory

Who knows? You need to test the circuit with a test light or digital multimeter. It could be as simple as a blown fuse, or it could be a defective car stereo.

In Car Stereo was created in 1983.

Yes, all you have to do in this circumstance is reconnect the speaker cables to the speakers.

starter and fuel ingestion light head stereo sensors computer

You can easily remove your old car stereo without taking help of a car stereo expert. However, you need to follow some steps and need some tools to remove your old car stereo. You can save your money by following the steps for removing your car stereo otherwise you have to pay more money to the professional car stereo installer.Here are some steps to remove the car stereo safely.First of all, Read the user manual of the car where you can find some tips to remove the car stereo. You may find a diagram of stereo wiring, so it would be more help to you.To remove your car stereo safely, please disconnect the battery to avoid electrical short during working with wires of car stereo.To remove your car stereo from the dashboard use screwdrivers to remove the screw, which is holding car stereo. Furthermore, check that your car stereo connected with dashboard using spring or clips and others.Remove dash panels and take out the bolts and screw which hold car stereo. Now pull out your car stereo.Now you can see there are some wires, which are connected on the back of the car stereo. A wiring of car stereo is protected with clip. You should pull out the wire straight out.For more information about remove old car stereo and want to new car stereo installation, please feel free to visit this blog

That means your car has a negative groung through the body of the car and you need to ground your stereo to a metal piece of the car. Make sure you use a test meter or light to verify a true circuit.

Not to the outputs. A band-pass equalizer works on input signals. To put it simply: if your stereo is the source of the sound, you would have to open the stereo up with schematics of its electronics in hand and find a suitable place to "pop in" an equalizer. If your stereo is only taking a signal from some other device and amplifying it (in essence doing the job of an amplifier with external signal source), put the equalizer between the source and the stereo. Please note that an antenna is NOT an "external source" - the radio frequencies are decoded INSIDE the stereo, and only then produce a valid "input signal" - all within the electronics of the stereo.

A car stereo is a perfect example of how you're spending your money on a name and not a product when you buy brand name. After all, the components the comprise brand name car stereos are often sourced from the same exact companies that generic manufacturers source their parts from. What this means is that by buying a brand name car stereo, you're paying extra for nothing more than a name and not a better stereo.

The THD Hot Plate is a power attenuator for a car stereo system. You can use the THD Hot Plate to keep a power source to your amps. The Hot Plate is used by serious car stereo enthusiasts.

One could replace a broken led car light at a garage. Alternatively, if one wishes to replace the broken led car light themselves there are many places that will demonstrate how to do this. For example, Youtube, Cars direct and Much Buy.

colar code for sony stereo car

I need to unlock a jvc-kw-xr616 car stereo

Car stereo review. has written: 'Mobile entertainment'

how do you replace shift gear light on a 1998 le altima car?

You may have to disconnect and recharge your car battery for your car stereo to work again.

Replace the bulb frome underside of the car.

the ACC wire from the stereo is connected to constant power (+12V)

light bulb laser head lights on car

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.