Want this question answered?
Remove the plastic shielding from around the steering column, unplug the multifunction switch, remove the bolts used to mount the multifunction switch. Installation is the opposite of reverse
You have a problem with your multifunction switch, probably the only way to fix it is to replace the switch.
Remove the tilt steering lever.Remove the steering column cover.Unplug the wire going to the switch.Now you can remove the bolts that hold the switch to the column.An instructional video of how to remove the multifunction switch on a 1993-1997 Dodge Intrepid has been included below.
Problem with multifunction switch in steering column
On a 1997 Ford F-150 : The multifunction switch is inside the steering column cover , except for the turn signal lever and the hazard flasher button that sticks out of the cover
Check ur fuses first of course, then pull the bulbs make sure they are good it will probably be the multifunction switch a bad ground or s bad power wire get a voltage tester and test the wires if nothing replace multifunction switch....like 35dollars if still nothing u have a bad ground time to start chasing wires...
how to change dimmer switch on 1997 Honda accord
Bulbs burned out? Bad switch in multifunction lever? Bad Hi-Beam relay?
Check over at www.tccoa.com and they can help you out with anything you need.
On a 1997 Ford Thunderbird : The odometer is in the middle of the speedometer
1997 Toyota Camry ignition switch removal
Remove your idler pulley first. it is the pulley right next to the alternator.