www.techcapri.com has instructions on this.
Please see the same question on the 91 Capri. The procedure is the same.
Mercury Capri was created in 1969.
You can find the 93 Capri Service Manual at http://www.techcapri.com/. Take pictures, mark what bolts go where. Good luck.
I believe there is a button in the trunk. I will check my manual
what about a 1991 mercury capri? What's the question the answer is yes YESS!!!!!!
Where is the headlight relay for a 1991 mercury Capri
Look in this web site for complete instructions: www.techcapri.com.
There is no clutch cable in 93 Mercury Capri. Its operated by hydraulics. There is a clutch slave cylinder and master cylinder. the seal in it probably worn out. Not very hard to work with.
You can find the wiring diagram for the 1993 mercury capri at the following site. This manual is very acurate for all the things pertaining to the 90's capri. www.techcapri.com This site has just about everything you need for this little car. Good luck.
The Australian built mercury capri went out of production in 1994.
The Mercury Capri was produced from 1970-1994
If you don't have the code, you will have to replace the lock cyl. They pop out if you know the procedure (and come with keys).
What Year? Sorry, a mercury capri convertible 1991
Need fuse box diagram for 1991 Mercury capri
Manuakl Transaxle as per owners manual booklet SAE 75W. 90 (part name)
You will not find an after market service manual for the 90-94 mercury capri from either Chiltons or Haynes. I have looked high and low...the Ford dealers in America don't even want to help out with anything connected to the 90-94 Mercury capri. They say a service manual is not avalible. After many days...weeks of research, I have found a web site that can help you out. www.techcapri.com They have downloadable material for servicing the 90-94 Capri. i got a factory service manual thru ford but took about 6 weeks and i had to do alot of the foot work for them.cost is a little over $100 will need a couple 3 ring binders to hold it all.but tells you anything and everything you want to know.
They unscrew from the back of the light assy. You may have to remove the light to get ot it.
Either replace it or install a manual gauge to determine actual oil pressure
www.techcapri.com has a pdf service manual section that will give ALL info on troubleshooting this! techcapri is th Bomb!
I looked in a repair manual and it said that the gap for a 1.6 l is .040
Assuming it is getting fuel and you have no spark, replace the ignition module.
replace the balist resister replace the balist resister
yes it will, just put a 91 in my 93......email me if you want....firstname.lastname@example.org