if it is the same as a 90 it is easy. take the door panel off, look for window motor mounting screws. get a 1/2 in drill bit and drill holes thru the metal on the door from the inside. you will see three divets or punches (these are to help you line up the wholes directly over the mounting screws there are 3 of them) in the metal that you will drill out. those holes will allow you to use a 10mm socket with an extension to take the three mounting screws out. pull the motor and make sure to unplug the connector and replace with the new one. This is a common problem with these cars i hope this help!
Show me how to put it in myself
OK
You have to replace a whole thing, not only a cable
how to take the door panel off of a 1997 mercury marquis
it's a complete kit. You can get one at a Junk Yard or from auto parts.
On a 1996 Mercury Grand Marquis the windshield washer squirter button is on the end of the turn signal lever
Yes
Average Cost per regulator is around $75 to $100 depending on the shop.
HOW DO I REPLACE WINDOW REGULATOR MOTOR ON PASSENGER SIDE WINDOW
my car has the same problem only with the passenger side window.....for me it was simply missing a plastic piece that fell off and i lost it try opening the panel and compair it to your passenger side and make sure it is all connected the same way
Insert the window into frame
My 93 Mercury's windows are off track. They stay on track until I manually push them up and they go off track. I have been told that you have to drill out the rivets that keep the window on track, adjust them, then replace the rivets with a bolt and nut.Could this be right?John
Just use a flat head screw driver to pry it off.
It is called a window Regulator go on line and you will find a picture of it. I have replaced 3 on mine.