(1997-2003 models) If you pull back the carpet on the drivers side of the trunk you will see a bracket. The bracket mounts the emergency fuel pump cut off and a fuel pump relay (i believe). Upon removal of the bracket (2 Phillips screws and a 11mm bolt) the Power Antenna assembly is exposed. After unscrewing the mast nut (on the exterior of the car) and removing two 11mm nuts you can unplug and disconnect the Power Antenna assembly.
Installation is reverse of removal.
how do I replace a power antenna on my jeep Cherokee 1992
how do you replace power antenna on 1988 deville
Tighten power steering belt 2002diamonte
150 kW @ 5000 RPM
I removed the entire power antenna assembly and could not find any way possible to separate the mast from the motor assembly. Odd, since Mitsubishi sold me an antenna mast.
To access the power antenna you have to remove the storage container next the spare tire. then remove the screws holding the plastic piece in place. Pry back the plastic trim and you will see the antenna behind it. On the outside there is a cross shaped piece holding the antenna in place. find something such as pliers to unscrew it (counter-clockwise). the antenna will fall out as a complete unit.
No
Remove the wiring harness from the bottom of your 1987 Chevy Corvette power antenna. Remove the power antenna retaining nuts. Reverse the process to install your new power antenna.
I am also trying to change my antenna on a Montero Limited 02 and found a antenna on EBAY but you have to replace everything. BUT a Better Idea is the one I found on WWW.CARSTEREOHELP.COM On this site, they say it is possible to change out the antenna whip only. This is the weekend, but I plan to pursue this option on Monday. I'll use my $30.00 antenna on some other car! Geo Here is the link: http://www.carstereohelp.org/stereoremoval/MitsubishiMontero1PwrAnt.htm
Replace the power antenna assembly.
you dont
go to NAPA auto parts and buy an antenna adapter