Drill out the two screws that hold the latch bracket. They are fat screws, so use a 1/4 inch bit in the torx holes. I just did this, and was finally able to open the piece of crap door that Ford built. they use 1950s technology on 1990s autos. check out their retro interior light reostat.
the cables are broke..Ihave the same problem,dealer want 425$ for latch handles(everything inside door)...check your local u-pullit
1A Auto
The cable end fittings are plastic and poorly designed. You will have to get new ones from the dealer and replace them or it. I had to replace all of them on my 1994 E-150.
What is a door latch mhahahaha lol Joking! Answer: Replace it with duct tape
Replace the door latch.
If the door latch on a 1999 Chevrolet Blazer is broken on the car frame, a new latch might have to be welded in. The old door latch will have to be cut out with a torch. If the latch is broken on the door, a new door might be cheaper than welding in a new latch.
= How do you replace the rear dutch door latch on a 1997 gmc safari?" =
Pull the door panel off, remove the door latch assembly from inside the door, and replace the switch which is hold onto the latch with one screw on the backside of the latch.
It is part of the latch, inside the door.
Remove door panel and replace latch mechanism
Inside the door under the latch.
It is in the door latch. You need to replace those switches. There are two in the drivers door and one in the passengers door. Take the door panels off and remove door latch and replace swithes.