remove the tire and brakes then pull them off if they wont come off use a hammer or mallet and that should free them up
Yes there were, Oldsmibile built Cutlass Ciera for a number of years, starting in the early '80's. Yes there were, Oldsmibile built Cutlass Ciera for a number of years, starting in the early '80's.
The firing order for a 93 Oldsmobile - Cutlass Ciera S is................ 123. 456 going upwards...that what it is on mine. thanks Dee
I have a 94 Oldsmobile Cutlass Ciera S on 20's and its on the original suspension.The only thing is to find the right width of the rim and a really small tire.(Mine 20's are 20x7.5 tire size 225/30)
your switch that controls the compresser might be bad.
Yes
Need to know what quad drivers are...
The Relay for what - door locks or something else?
The 1993 Oldsmobile Cutlass Sierra thermostat is located on the front of the engine. You can follow the water supply line from the radiator to the thermostat housing.
The 1994 Oldsmobile Cutlass cam sensor is located on the back of the left cylinder head. The cam sensor should be labeled as such.
The orifice tube on a 1996 Oldsmobile Cutlass Ciera S is located in the air conditioning system, specifically in the liquid line between the condenser and the evaporator. To access it, you typically need to follow the metal line from the condenser to where it connects to the evaporator near the firewall. It's often housed in a fitting that may require disassembly to replace. Always ensure the system is properly discharged before attempting any repairs.
The center bolt on a 1993 Oldsmobile Cutlass Ciera S typically has a right-hand thread, meaning it tightens clockwise and loosens counterclockwise. This is standard for most automotive applications. However, it's always best to consult the vehicle's service manual or a trusted mechanic for confirmation.
The 1994 Oldsmobile Cutlass turn signal relay switch can be found below the dashboard. The relay switch will be on the drivers side of the passenger compartment.