First open bleeder screw on slave cylinder and drain fliud.Your slave cylinder is bolted on to your transmission with 2 bolts,take bolts out and remove fluid line from slave cylinder.Screw fluid line to new slave cylinder and set end of slave cylinder into fork position ,then screw 2 bolts in and fill clutch master cylinder with dot 3 brake fluid and pump clutch pedal a few times and hold to floor and open bleeder screw to let air out ,do this until all air is gone,dont let clutch master cylinder fluid get low while doing this,you might want to get a clear hose and attach to bleeder screw and other end in glass jar with brake fluid so you can see air coming out.
I went to autozone.com and looked both up and they are different.
You will need to remove the transmission to replace the clutch slave.
check clutch slave cylinder
It should be down below where the slave cylinder connects to the tranny
remove 2 bolts holding it on,then replace, follow line back to bleeder valve,bleed,then bleed at slave cylinder
the clutch is burnt up. buy a clutch kit check your slave cylinder for leaks, its bolted on the side of transmission,if its leaking ,replace,if not ,then it could be u need a new clutch.
I am paying $195 parts and labor in my 98 maxima
on slave cylinder that's bolted to side of transmission and one on clutch damper ,which is bolted on left side of fire wall.
first take off slave cylinder, it should be mounted on your frame, then take off hoses, connect hoses to new slave cylinder. mount slave cylinder back to frame and bleed ur clutch for f*****g hours.
how do you connect the hyraulic master cylinder to the clutch slave cylinder on a 2000 chevy S10 pickup 2.2 4.cylinder
The Clutch slave cylinder is located on the passenger side of the bellhousing.I recommend to replace the Clutch Master cylinder also;if either one is replaced , the other will fail in no time.
Its hydraulic ,you cant,check your slave cylinder to see if its leaking,its located thru a rubber cover on side of transmission,if leaking replace and bleed,also check clutch master cylinder,if not leaking,then you might need a new clutch kit.