answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you replace the spring in the latch on KIA 2001 glove compartment?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you open a glove compartment in a 2001 cabrio when the latch is broken?

Remove the three Philips screws along the top and the two on the bottom corners and remove the entire glove box. You can then work on the latch from the back of the latch and easily open the glove compartment by gently prying off the corners of the glove box from the locking pins.


How do you replace glove box latch 03 Chevy Venture?

There are 2 screws on the inside that get removed and pull the latch down.


How do I repair a glove box latch that will not catch on my Blazer S-10?

Replace any broken parts or adjust latch assembly


How do you fix a stuck glove compartment latch on a 1992 jeep cherokee lardeo?

If broke you probably will need to use a screw driver to break it open and replace. I don't know any other way in without breaking the lock.


How an you open the glove compartment for your 1995 corsa?

There is a latch that you have to pull. If it's locked and you don't have the key you'll have to get someone to break or pick the lock


Where is the hood latch to open hood?

HI, The hood release is normally found in the glove compartment. On my '97 it's on the left top when I open the glove compartment door. Yours might be a bit different, but typically it's there. Good luck. Steve H.


How do you replace air filter on 05 Nissan Murano?

open the glove box latch then you will see the filter


How do you you open a glove compartment with a broken latch handle on a 2001 VW Golf?

latch broke- http://www.dubdiy.net/interior/bb.html == == get creative, maybe remove door from where it is mounted by the hinges..? good luck :)


How do you you open a glove compartment with a broken latch handle on a 2001 Mitsubishi galant?

if you still have the spring intack unlike mine. then get a flat head screw driver. with your right hand insert driver above spring from left side of lock. (your right). now with driver push spring down and it will pop open so becareful. if the spring has fell off good luck. im on the web trying to figure it out now.


How do you replace the slide release latch spring on a savage model 30 shotgun?

Best left to a gunsmith.


How do I remove the glove compartment box to access radio fuse?

To remove the glove compartment box in order to access the radio fuse, you will typically need to follow these steps: Open the glove compartment by pulling the handle or latch located on the front of the compartment. Look for any screws or fasteners that are holding the glove compartment box in place. These may be located on the inside of the compartment, on the sides, or on the back. If you see any screws or fasteners, use a screwdriver or other appropriate tool to remove them. Once all of the screws or fasteners have been removed, gently pull the glove compartment box out of the compartment. It may be held in place by clips or other fasteners, so you may need to gently wiggle it to loosen it. Once the glove compartment box is out of the compartment, you should be able to see the radio fuse and any other electrical components that may be located behind it. It's important to be careful when removing the glove compartment box and to make sure that you are using the appropriate tools for the job. If you are not comfortable with this task, or if you are unsure about how to proceed, it may be best to seek the assistance of a professional mechanic or technician.


Where is the fuse panel located in a 1987 dodge ram?

One under the hood by the hood latch, one in the glove compartment, and occasionally one by the parking brake pedal for conversions.