Want this question answered?
Remove the tail light housing and replace the bulbs.
You have to unbolt the entire tail lamp assembly to change the bulbs. Unbolt the tail lamps from inside the corners of the bed, replace the light bulbs, bolt the tail lamps back in place.
AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.
Check the tail light bulbs. These bulbs do double duty. Thet are both the tail light & the brake light. Tail light part might be burnt out.
The # is 1157 bulbs.
incorrect resistance of light bulbs installed. causes electrical feed back. replace all bulbs with factory replacement Also check that the tail light ground is ok. If the tail light bulbs aren;t grounded, it causes a backfeed of power to the dash lights and causes them to turn on.
on some cars the tail lights and brake lights are totally different bulbs gain access to the bulbs and have someone push the brakes so that you can determine which bulbs are the brake lights and replace the tail lights
Hey Laura==The whole tail light housing has to come off and the bulbs just come out from the rear. GoodluckJoe
you can take the tail light out by unscrewing the wing nuts in the trunk, when all wing nuts are off pull the tail light out then take the light bulbs out to replace the tail light.
3 big plastic wing nuts hold the tail light assembly in the body. remove those and the tail light can be removed to gain access to the bulbs.
Most tailight bulbs and tail light assemblys are accessible inside the trunk many are hidden behind carpet and or a plastic or fiber panels. , EzForJesus
separate