Follow the upper rad hose and at the engine there is a housing containing the thermostat. When replacing it make sure the spring goes toward the engine.
Problem is most Likely the ground wire on the motor by the thermostat
The tension belt for a 1991 Honda Civic and located on the driver side of the engine. The pulley is right above the compressor.
At the lower end of the top rad hose within the water outlet. Mark
Yes it will. Make sure you replace your motor mounts as they are most likely torn.
At the lower end of the top rad hose within the water outlet. Mark
best transmission fluid 1991 Honda civic lx
a 1991 Honda civic motor
The engine coolant on a 1991 Honda Civic is replaced by turning the drain petcock and releasing the coolant. The filler cap is then removed and coolant added until the system is full again.
To change the brake rotors on a 1991 Honda Civic raise the vehicle. Remove the wheels and brake caliper bracket. Remove the brake pads. Loosen the rotor mounting screws and replace the rotors.
The Civic DX Sedan does 1991 of course
1988-1991 Honda civic dx,si,standard civic, crx dx,hf,si any Honda auto trans 1988-1991 will fit it
No.