Replacing the thermostat on a 1996 Grand Marquis is not very hard. First, follow the upper radiator hose to find the thermostat. Then disconnect the hose and drain it. After the hose is drained, remove the bolts holing the thermostat housing in place. Take the old thermostat out and replace with a new one.
A crack near or on the thermostat housing can cause a coolant leak in a 1996 Grand Marquis. The thermostat housing is located near the manifold on this vehicle.
You must drop the fuel tank.
The thermostat on a 1996 Jeep Grand Cherokee 5.2L is replaced by draining the coolant and disconnecting the radiator hose. The housing is then unbolted, the thermostat removed, and a new unit put in its place.
From under the car, and in the front of the tank there is a panel that you can open. The pump is in there.
Is the engine a 3.1? If so it is easist to remove the crossover pipe, then the thermostat housing.
where is the starter located on a 1996 mrecury grand marquis this site SUCKS and is very user UNFRIENDLY!!!!!!!!
Replace the shocks, or struts if equipped.
Depends on what size engine you have, and what year of Grand Am you have. Mine is a 1996 with a 2.4L engine. So my thermostat is located in the bottom radiator hose, where it goes into the water pump.
Any auto upholstery shop can replace your vinyl top.
According to the 1996 Mercury Grand Marquis Owner Guide : ( 20.0 U.S. gallons / 75.7 litres )
According to the 1996 Mercury Grand Marquis Owner Guide ( 5W-30 is the PREFERRED engine oil )
Your 1996 Mercury Grand Marquis may need a new transmission or something as simple as transmission fluid.