Please refer to http://npora.ipbhost.com for details. Just ask. To replace the water pump it will take a little bit of time u also have to remove the timing belt to reach the water pump. You first need to start by taking the upper and lower radiator hoses off, then the Fan Shrould. Then the fan and all belts. Then looking strait at the engine their will be a ventalation hose on the valve cover on the Passenger side that runs to the intake remove that also after all is removed then you can take the timing belt cover off and before u touch the timing belt get some white out and mark the timing belt where it sits on the Crank and Cam Shafts. After all that the u can remove the timing belt look the timing belt over good u may want to go ahead and replace it at this time i would but the decision is all you'rs. After all is removed u can access the water pump. Good luck
Yes, it is in the fuel tank.
The 1987 Nissan Pathfinder wiring diagram can be obtained from most Nissan dealerships. The wiring diagram can also be found at most auto-parts stores.
Drain the water from your 1987 Nissan Stanza. Remove the water return hose from the water pump. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
if your 1987 Nissan pickup leak water from manifold what do we do
$50 in ma Jus go to your states dmv web sight to find out
Remove the water from your 1987 Nissan pickup truck cooling system. Remove the water supply hose. Remove the water return hose. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
cant see bolt on other side off starter, how to replace it ?
To replace the thermostat on a 1987 Nissan pickup, drain the radiator. Locate the thermostat which is under the top hose assembly, and remove the screws holding it in place. Put the new one in position and refill the radiator.
How do you replace the water pump on a 1988 Cadillac Seville?
that would be the throttle sensor.
yes, see toms z31.com
drop the gas tank...pull the fuel mod out and replace the pump
how to replace water pump celica 1987
Where is the ignition control module on a 1987 nissan 300zx
i have the same problem with a 90 chevy truck im was told to blow out the lines to the cooler rad. in the front grill #2 its the springs in the front pump
Nissan Saurus was created in 1987.
Very easy it is simply bolted unto the wall and unplug.
The 3.0 liter V6 in a 1987 Nissan Pickup is an interference engine
To install a thermostat on a 1987 Nissan 300ZX, remove the two nuts and one bolt on the lower water neck. Slip off the old thermostat and use a gasket sealant to secure the new thermostat.
To remove and replace the heater core on the 1987 Nissan 300ZX with air, begin by removing the dashboard totally. This means the radio panel and the instrument cluster. Remove all air ducts and access the heater core. Remove the bolts holding the core and replace it with a new core. Then replace the dashboard and instrument panel.
look under the drivers side dashboard you will find the combination flasher unit, it is square and has a wire connector going into the side Try this site out, it might help you out. http://autorepair.about.com/library/pictures/illustrations/bl703lib.htm
how to replace gas tank 1987 corvette