I am assuming you have the 3800 fuel injected engine. remove the belt first thing. Now what seems wrapped arounf the water pump is the engine support. That stands in the way of the water pump bolts.Jack the engine up a bit as you are doing this. Really the rest after you do this is easy. I did it and the time to figure all this out was about an hour and another two hours to complete the job. Difficultily level from one to five maybe a 2. good luck.
ecm location 93 oldsmobile 98
On a 91 regency it's located in the center under the hood near the hood latch assembly!! Dave
how do you replace the headlight switch on a 1993 cutlas ceria*
water pump has some (2) pins into the block...it needs to be pryed stright off.
4.5 quarts w/o filter and 5 quarts with filter.
4 q without filter change - 5q with. From the manual.
how do you replace a water pump on a 1993 lexus es300?
under dash driver side kick panel area
Regency Centers Corporation (REG)had its IPO in 1993.
under the passenger side behind glove box the is a panel you must remove be careful for wires remove panel to display heater core remove hoses from under hod and then pull heater core out from inside passenger side
The 1993 Oldsmobile Cutlass Sierra thermostat is located on the front of the engine. You can follow the water supply line from the radiator to the thermostat housing.