according to haynes manual: 1. disconnect battery 2. drain cooling system 3. remove drive belts 4. remove timing belt 5. remove any accesory brackets from the water pump 6. remove the bolts and detach the pump from engine(note the location of longer bolt) 7. clean the bolt threads and the holes in the engine 8. make sure new pump is identical 9. remove all traces of old gasket sealant and o-ring 10. clean engine and new pump mating surface with acetone 11. apply thin layer of rtv sealant to o-ring groove of new pump and place new o-ring in groove 12. attach pump and bolts finger tight 13. install remaining bolts(alternator adjustment to water pump bracket 33ft lbs) (water pump to block bolts 108in lbs) 14. refill cooling system and bleed. run engine check for leaks
how to install and replace a rack and pinion on Honda accord 1994 lx
How do you replace spart plug tube seal of Honda accord LX 1994?
Is there a good site to go to asap to find how to replace a starter for a 1994 Honda Accord EX
the 1994 Honda accord has an obd2 ecu.
where is relay on 1994 Honda accord for sun roof
no
97 honda accord headbolt specs
on the firewall, there are 2
1994 Honda accord ex remove rear rotor
yes
instrument cluster needs to come out and apart to gain access and replace gauge
You don't fix it, you replace the door lock actuator.