Changing the water pump on the cavailer isent the most fun thing, but its doable, i just did mine awile ago. Fist break the bolts on the pully, just so there loose, this will make it easier than how i did it. Next remove the belt. Next remove the bolts from the water pump 1/2 way, look out for hot coolent if the engine has been running. now unscrew the bolts from the pully. now finish taking out the pump bolts. after they are all out take out the pump, dosent fit out that nicely, just fight it out. put on the new gasket on the new pump, after u cleaned off all the old gasket from the engine block. add rtv, usually a good idea, put in the new pump, bolt it in, bolt it the pully, put the belt on, top off the coolent and its good to go.
It is behind the timing belt cover and is driven by the timing belt. There are various arrangements according to which engine is fitted.
Remove the head and replace the gasket. No other way to fix it.
* Remove the front bumper fascia * Unplug the electrical connector and remove the bracket bolt
its either the water pump or thermostat take it to a shop if you can that pump is a nightmare to change
2.2L Altenator on a 2.2L, AND, 2.4L on a 2.4L ONLY!
no i can not answer this quiestion
Auto or standard?
Here is a link with pictures, tools needed and everything to do the job. http://www.v6z24.com/howto/heatercore
take the plastic cover guard off and it is 2 bolts right on top take them out and it is free
You are going to have to determine which ball bearings before you can get a price to replace them. Sorry I can't be more help.
valve or rocker clearence for a 1995 chevy 2.2
i don't see why not the 2.2 was used in 95 and 96 should fit right in
Inside the oil pan
its under the intake in the front of the engine
The fuel pump is in the gas tank
The fuel pump located in the gas tank.You need remove the tank for change.
The oil sending unit on a 1995 Cavalier is on the passenger side of the engine. It is close to the oil filter, screwed into the block.