Water Pumps
Chrysler Cirrus

How do you replace the water pump on a 1995 Chrysler Cirrus lxi?

525354

Top Answer
User Avatar
Wiki User
Answered
2015-07-16 18:16:15
2015-07-16 18:16:15

The water pump is powered by the timing belt. While you're in there you may as well change the belt. I'm told you need a special tool to keep the cam? aligned while everything is apart ( I brought it to a garage to have it done) I'm sure a Chilton's manual ( or equivilent ) will describe how to do it.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Chrysler Cirrus was created in 1995.

No, but it is recommended. If the belt breaks, valves can get bent.

How do i remove the anti theft system on my 1995 Chrysler Cirrus?

on the top of the gas tank, you will have to put the tank down so you can replace it.

I just bought a 1995 Chrysler Cirrus with 100,000km (60,000 miles?) and I'm getting 27 mpg

It is in the tank. The tank must be lowered to access pump.

The Chrysler Cirrus was only built from 1995-2000. The washer bottle is under the hood on the driver side.

I have a 95 Chrysler cirrus and my battery is located in the driver side wheel well. You have to take the wheel off and there is a comapartment leading to the battery

No, it does not. The fuel system is computer controlled.

The trans oil is inside the transmission.

No, you will need to fix the failure.

95 Chrysler cirrus has a fuel shut off relay located under hood in box with other relay and fuses

The Chrysler Cirrus was only built from 1995-2000. The radiator cap is located on the housing where the upper radiator hose hooks to the engine.

Water can get in and cause a misfire.Water can get in and cause a misfire.

It is on the throttle body, opposite of the cables.

If it is a 2.5 it is located in the distributor housing.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.