Want this question answered?
check water in plastic water box right side of engine compartment. that's where sensor is
remove and replace water pump in 1997 Oldsmobile aurora
lower the engine from the car
is it hard to replace a waterpump out of a oldsmobile aurora 95
water pump has some (2) pins into the block...it needs to be pryed stright off.
We replaced ours and it cost 21.95 for a lifetime water pump.....My husband replaced it by himself...
maybe this will help,,, i just replaced the water pump,heater core,thermostat,battery,alternater on my Oldsmobile and found this site to be very helpful even has pictures AutoMedia.com maybe you can find your answer there good luck
I am assuming you have the 3800 fuel injected engine. remove the belt first thing. Now what seems wrapped arounf the water pump is the engine support. That stands in the way of the water pump bolts.Jack the engine up a bit as you are doing this. Really the rest after you do this is easy. I did it and the time to figure all this out was about an hour and another two hours to complete the job. Difficultily level from one to five maybe a 2. good luck.
Black Water Elite was created in 2006.
Remove the serpentine belt then remove the water pump bolts and any attached hoses. It would help to know what year, model, or engine size.
To change the water pump simply remove the bolts from the waterpump, pull it off and replace with new. The power steering pump will need to be loosened and moved aside to remove one bolt. Clean old gasket from engine block and replace with new gasket and replace with new waterpump.
http://aurorah.proboards47.com/index.cgi?action=display&board=1stgen&thread=2861