1. jack the vehicle up on both sides, use jack stands if possible.
2. Remove Passanger front tire, along with plastic splash shield
3. Drain coolant
4. With serpentine belt still installed, loosen the 3 bolts on the water pump pully, don't take them all the way off, just loosen them.
5. Use a 14mm wrench to reduce tention on the serpentine belt enough
so you can slide the belt off
6. Remove the water pump pully bolts, remove pully, or let it rest on the
pump shaft.
7. Remove water pump housing bolts (6 of them) and discard the gasket
8. reverse procedure to reinstall new water pump
How do I replace the water pump in my 1994 Saturn SL2 series standard twin cam.
how to replace water pump on Nissan quest 3.0 1995
To replace the water pump in the 1995 Buick Roadmaster, begin by first removing the pins that hold the water pump drive to the water pump. Then, pry the timing cover off of the water pump area.
== ==
The water pump on a 94 Saturn S1 is replaced by removing the serpentine belt, engine accessories, and water hoses. The pump can then be unbolted from the engine block and a new pump put in place.
Inside the fuel tank. You'll need to lower the tank to replace the fuel pump.
Remove the belt from your 1995 Chevrolet water pump. Remove the water pump hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
About $500 to $600 for the belt, and another $150 or so for the water pump.
it has a 2.2 vtech engine
if the bearing is noisy or the pump is leaking replace the pump.It is a job to replace but if you wanat to get a manual on your car from DISCOUNTAUTOREPAIRMANUALS.COM
The water pump does not have a specified life span. The time to replace it is when it is leaking or noisy.
If you have ever replaced a water pump on any vehicle the answer would be "yes" you can do it yourself.