Unless you are an able mechanic do not attempt this.The timimg belt drives the water pump.
Set the engine on top dead center. Align the timing marks, use whiteout to mark their position Remove the fan belt and fan. Remove the top radiator hose. Remove the thermostat housing assembly. Remone the fan belt bracket. Remove the timing cover. Remove the two camshaft pulleys. Remove the back plate of the timing cover. You can now get to the water pump.
Good luck.
Tony.
you shouldn't have to bother the camshaft pulleys , having the timing belt drive the pump wouldn't make the job any haqrder
2 days.
How do you replace the water pump and where is it located on a 1996 Buick Skylark V6
How can do I replace a water pump on a 96 camaro z28
With the proper tools, about 3 and a half hours.
The water pump is loacted behind the timing belt. To change the water pump you should also do the timing belt.
Water pump location on a 1996 DevillWater pump is located under the thermostat on the drivers side of the engine
The water pump is driven by timing belt, so, replace the timing belt while you are replacing water pump, because you have to take off timing belt to get to water pump.
it`s in the fuel tank look under back seat to get at top of fuel tank
how to change water pump on 1996 olds ciera and what tools do i nees
Remove the water return hose from your 1996 Chevrolet water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
remove timing chain
It has a 3.2 v6 4x4