loo
You can not replace just the tire pressure sensor on a Boxster. You will need to replace the whole sensor. The sensor is located inside the tire assembly.
Yes 5x115 is a typical GM bolt pattern. Common for late 80's through early 00's
The one after the catalytic converter.
how do you replace hydraulic line on a 1997 s-10
A cam sensor and crank sensor was not used on that year. If the engine is not firing then I would replace the ignition module that's in the distributor.
That would be the O2 sensor located after the catalytic converter.
problem with the coolant sensor check the connection on the sensor reset your OBD I code if that don't work replace the coolant sensor
look under the throttle body on the front of the engine there s a sensor with 3 wires going to it that is the engine coolant temperature sensor
Replace it with a new one.
they don't even make a Chevy s15
To change the camshaft position sensor on a 1997 Chevy Lumina, first disconnect the negative battery cable for safety. Locate the sensor, which is typically positioned near the engine block, and unplug the electrical connector. Remove the mounting bolt(s) securing the sensor, then take out the old sensor. Install the new sensor in reverse order, secure it with the bolt(s), reconnect the electrical connector, and finally reattach the battery cable.
replace your speed sensor