it depends on what year civic you have and what motor is in it as to where the bolts are located. but you remove the bolts, scrape the old gasket of of the head with a razor (be careful not to scratch or gouge) and you install the new gasket and valve cover. tighten the bolts to recommended specs, on mine i believe it is 32-35 inch pounds
how do you replace the valve cover gasket on a 2002 mitubishi lancer
# The PCV valve is located in the valve cover # Detach the hose from the valve then unscrew the valve from the valve cover
The valve cover ask it, on a S 40 Volvo, can be replaced by first removing the valve cover. Remove the old gasket and replace with a new gasket.
It is in the driver side valve cover, you must change the valve cover to replace the PVC valve.
The valve cover gasket, on a 2004 Jeep liberty, can be found by removing the valve cover. Peel the gasket off of the head and replace with a new gasket.
Under the silver cover on the valve cover. You remove it with 10mm socket.
The 1983 civic, hatchback with 1.5 engine does not have one.
The torque should be 7ft-lbs.
To replace the valve cover gaskets on a 2003 Jeep Liberty, the valve cover is removed. The old gasket is then removed from both the valve cover and the manifold (old gasket will come off in pieces on both sides). Then spread the sealant on the manifold, place the new gasket on, then put sealant on top of the gasket and replace the valve cover and bolt down.
How much does it cost parts and labor to replace a valve cover gasket on a 1990 Honda Accord 4door.
no, but it does mean you need to replace the valve cover gasket.
how do you change valve cover gasket 2004 hyundai elantra