EGR Systems
Honda Odyssey
Honda Accord EX

How do you replaceclean the EGR valve on a 2000 Honda Odyssey minivan?

505152

Top Answer
User Avatar
Wiki User
2006-07-22 01:47:03
2006-07-22 01:47:03

EGR valve change is extremely simple: 1. Get a new valve 2. Using 10 or 12 mm wrench remove two nuts holding the valve 3. Lineup a new valve and tighten nuts back. 4. Reset CHK ENG light using OBD II device.

12
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The 2001 Honda Odyssey EGR valve is located on the outside of the air cleaner housing. You will find the valve, on the back of the housing.

User Avatar

The evap control valve is on the cannister

User Avatar

You can change the 2005 Honda E GR valve by removing the vacuum hose from the valve. Remove the valve retaining screws. Reverse the process to install the new valve.

User Avatar

The PCV valve on a 2001 3.3 Chrysler minivan is on the top of the rear valve cover.

User Avatar

Call your Honda dealer, they shld replaced it free of charge. They have a bulletin for it and shld we under warranty still

User Avatar

From the 2006 Odyssey Manual: A is an oil change, 1 is rotate tires and 4 is replace spark plugs, and timing belt. Inspect water pump and valve clearance.

User Avatar

"What is the valve clearance on 1992 Honda accord?"

User Avatar

From what I read the Honda dealer is priced at $1100, but you can buy third party for around $250. You may have to replace the ERG valve at the same time - Check online for other Honda customers experience using google.com

User Avatar

Where is the PVC valve on a 2002 Honda Civic EX?

User Avatar

where is the pcv valve locate on 95 Honda passport

User Avatar

where is the iac valve on a 99 honda civic lx?

User Avatar

How do you change the ac expansion valve on a 2001 Honda civic

User Avatar

what is the valve adjustment procedures for a 1995 honda forman 400

User Avatar

Locate heater control valve in a 2001 Honda civic

User Avatar

VALVE CLEARANCE FOR A 2000 HONDA CIVIC EX 2 DOOR

User Avatar

Hi- your pcv valve is located right in the center of the valve cover (usually black cover that says Honda on it)

User Avatar

Valve clearance for a Honda GC160 engine; Inlet 0.15 +/- 0.04mm Exhaust is 0.20 +/- 0.04mm

User Avatar

The 97 Honda VTec PCV valve should be on the valve cover. The valve is a plug-in type and just pulls free.

User Avatar

What do a pc vale do in a Honda Accord

User Avatar

The expansion valve, on your 1998 Honda Accord, is located just before the thermostat housing. You can follow the water hose from the radiator to the expansion valve.

User Avatar

On a 1985 Honda Civic, the PCV valve is situated on the firewall side of the engine. The valve is connected to the rubber hose.

User Avatar

Where is the location of my vent valve solenoid 98 honda accord ex v6


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.