Go to your dealer. Local reprogramed mine without much fuss or thought.
The 1994 Mercury Villager has a 3.0 litre V6 engine from the factory : ( it has 6 engine cylinders )
To disable the factory alarm on a 2000 Mercury Villager, put the key in the ignition and turn it halfway. Let it stay in the spot for 10 minutes and start the car.
The 3.3 litre V6 engine ( from the factory ) in a 1999 Mercury Villager has a timing BELT
How can i disable alarm activated on 1996 mercury villager Horn and location this part please How_do_you_disable_factory_alarm_activated_on_1996_mercury_villager_Horn_headlight_are_blinking_continously.
I have a 95 villager and it came from the factory with a block heater.Look around the headlights for the plug tucked away.
On a 1997 Mercury Villager open the drivers door and on the latch pillar you will see an information sticker that shows the original size tires on the vehicle from the factory
if it is equipped from factory it is mounted by the rear controls for the radio behind drivers seat
hidden back drivers side storage compartment, passengerside should have your Jack etc.
1994 Mercury villagers come factory charged with R134a refrigerant. Vehicles built 1993 or prior were charged with R12 for note.
It came from the factory with R12 (Freon). As R12 is so very expensive, I would convert this car to R134a. You can buy a conversion kit at most auto parts stores. If you have leak, make sure to have the leak repaired.
This is a very complex operation that is not possible to describe here. You will need to purchase a factory repair manual, that would be the only source for something this specialized.
Yes. The rotor is held in place from the factory by two clips. These are generally not replaced by some mechanic during a brake service.