Want this question answered?
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
how to reset display screen after changing oil at 15000 miles. this is on a 2008 highlander.
It's done with a code reader plugged into diagnostic port under dash.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
To reset a check engine light for a Highlander 2003, disconnect the battery for 10 minutes. After this time, reconnect the cables.
Go call the Toyota car company or headquarters and ask the people who made the car.
There is a reset button underneath the dash just right of the hood latch. Pressing and holding will turn it off. Then let go of button and press it again and tire pressure light will flash 3 times and then reset.
how do you reset the check engine light on a 2005 Toyota tundra
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
start with engine off. press and hold that speedometer resetter while starting engine, check engine light will flash a few times then disappear.
By repairing whatever tripped the light. Then you use an OBD2 scan tool to reset the light. You just have to disconnect the battery for a minute and then the check engine light go off, if the problem has been fixed!!! Disconnecting the battery will reset the light on most, but not all, 1995 & older cars, but on 1996 and newer cars this will rarely reset the light. It requires an OBD2 scan tool to reset the light on most newer cars.
To reset the T belt light in Toyota kindly see your manual or take it to a Toyota accredited car dealer.