You can try and disconnect battery for 10 minutes. If that doesn't work then the airbag light is on for a reason and must be fixed at dealer to make sure your airbags are working. If you don't have the problem fixed eventually the light burns out and then an irritating audible buzzer goes of something like 5x5 times. Same if you pull the bulb. If you try and take out the fuse it is connected to the signal lights and they won't work. Drives you crazy. If you don't want the airbag and want to risk an accident with no airbags then the chime box is located left side of the radio. Don't unplug the adaptor or else all chimes will fail. Find the lone live wire which there are 3, of which only 2 come on when the key is turned on, the other is a constant. It is one of the 2 that comes on when the key comes on.But again, it is better to think about your safety and pay the bucks at the dealer to make sure you have airbags.
In order to get your SRS Service Airbag light reset, You have to go to the Volvo dealership.
how do you reset the passenger side airbag on a 2000 passat?
The airbag light stays on when the computer has detected a malfunction and set a code. Clearing the code with out repairing the failure will not shut the light off.
YOU DONT BUT TO RESET THE LIGHT AFTER REPAIR GO TOWWW.VEHIX411.COM TO SEE FREE VIDEO INSTRUCTIONSI have a 2000 CRV and the airbag deployed which caused the seatbelts to lock. How do you reset them?
The air bag light is on because there is a problem with the air bag system. Until the problem is fixed the light will remain on. When the problem is fixed the light will reset itself.
Take it to your Dealer for repairs. It could be any number of sensors or the contacts in the column.
my passenger window came out of track on my 2000 323i wagon when i put it back on track i had to unbolt the passenger side airbag ,i did not disconnect iti only unbolted it now my airbag light is on,can i reset it without going to the dealer,thanks
I have a 2008 frontier and as far as I know, you have to take to the dealer and pay $80.00 to reset it. I'd like to know a cheaper way to do this. ---------------------------------------------------------------------- I have a 98 and if you have disconnected part of the airbag system and turned the key on you have just set the light on. If this is the case it was very easy to reset, however if it comes on on its own, you have a problem to deal with
The airbag light stays on when there is a malfunction in the system. The airbag computer will need scanned to know possible causes.
how to reset abs warning light on 2000 gmc Yukon
Sorry , there isn't a reset button - you have to have the Explorer scanned to find the trouble code(s) that caused the check engine light to come on . The problem has to be repaired before the check engine light can be turned off by using the OBD II scan tool
i have a 2000 xls and the reset is above the speedometer