To re-set Toyota Highlander 'maintenance required' dashboard warning light: Turn on the ignition and observe the odometer window. Ensure that it is set on the totalaccumulated mileage of the vehicle (NOT the trip meter). Turn off ignition. With the ignition off - depress the little plastic switch that changes the odometer to the trip meter and then while holding the switch in the depressed position, turn on ignition (it is not necessarry to start the car). Continue holding the swtich down for 5-10 seconds and you will see the odometer window flash back to zero. Release the switch and turn the ignition off, and it will be re-set for another 7,500 miles.
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
To reset a check engine light for a Highlander 2003, disconnect the battery for 10 minutes. After this time, reconnect the cables.
start with engine off. press and hold that speedometer resetter while starting engine, check engine light will flash a few times then disappear.
I have a 2003 Highlander. Whenever I get the oil changed, the check engine light comes on within a couple of days. I finally figured out that there is a hose under the air filter case that gets disconnected when the filter is checked. Just reattach the hose and the light will reset after a few restarts of the engine.
how do you reset the check engine light on a 2005 Toyota tundra
Go call the Toyota car company or headquarters and ask the people who made the car.
how to reset oil timing on 1990 toyota
Type your answer here... Hello how do you reset the check engine light on a 2003 Toyota 4runner. Thanks
The easiest way to reset the 2001 Toyota check engine light is to remove the check engine light fuse. The fuse can be found in the fuse box.
By repairing whatever tripped the light. Then you use an OBD2 scan tool to reset the light. You just have to disconnect the battery for a minute and then the check engine light go off, if the problem has been fixed!!! Disconnecting the battery will reset the light on most, but not all, 1995 & older cars, but on 1996 and newer cars this will rarely reset the light. It requires an OBD2 scan tool to reset the light on most newer cars.
To reset the check engine light in your 2006 Toyota Corolla, you will need to attach the car to a diagnostic computer. This allows you to pinpoint the reason for the light coming on, select the correct sensor, and reset the light.
how to reset display screen after changing oil at 15000 miles. this is on a 2008 highlander.