By taking the cable off battery putting back on reset code
with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
The code to reset the radio is specific to your car. No one will know that code. If you cannot find the code written down somewhere, contact your Buick dealer for instructions on how to get the code. The radio may need to be removed to get the radio serial # and with that the code, or the selling dealer may have it on file.
There is no exact way to reset a Kia Sorrento radio using a code. Codes can be revealed at the car dealership providing you prove ownership of the car. The radio code is tied to the VIN number.
the easiest way to do this is by disconnecting the battery for about 3 minutes and connect it back. Make sure you have the radio code before doing this because after the radio resets it will ask for the code. This method will also reset the GPS in the car and the GPS will also ask for the code to turn on.
This is a dealer item. They can reset it.
Leave the radio on for 1 hour and it will reset and then accept the 5 digit security code.
quite possible if cd is stuck this code will appear
Howdo i reset my radio security code ml 500 2002
The reset code is specific to the radio. Look in and on the glove compartment for the code and in the owners manual. If it is not there you need the serial number of the radio and have to call the dealer for the code.
with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
You insert the code with the radio presets. Just push the reset # that corresponds to the radio preset. If you have locked the radio up just leave it on for a few hours and it will reset so you can enter the code again.
Mine was reset when the radio says "code" by entering 2456 on radio channels
There is nothing to reset except the radio. Insert the 5 digit radio code to reset the radio and then reset the clock and presets for stations.
Depends on what the error code is.
How to reset security code in 2001 Z3
By using the radio preset buttons to insert the 5 digit code. If you do not have the code click the link, sign up at the Honda Owner's Link, and then click get radio code.
i just went to the acura dealer today to have my radio reset from the error code displayed after my radio was disconnected from the power. they looked inside the glove box on the side and found the five digit code that must be entered to reset the radio. otherwise you must remove the radio and look on the back for the serial number and then your acura dealer can find the five digit code in the computer system. (this was going to cost me $100 an hour for the acura labor charge!!) check your glove box. The code I have is 62612.....I hope that works for you