To turn off the maint. req light (it comes on every 3k -5k mi. for oil change interval). After I change my oil I do the following: 1. depress and hold the odometer reset button 2. turn the ignition switch to on, then off 3 times (do not engage the starter), the third time the odometer will countdown "_ _ _ " then "_ _" then "_" then blank. 3. if the check engine light was just an oil change warning then the check engine light will go out.
The answer is in the manual.
How do you reset maint read light on 2010 corolla
A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.
how to reset oil timing on 1990 toyota
how do you reset the low tire pressure warning light on a 2009 camry
how do you reset anti theft on a 1994 toyota camry
i was checking fuses on 1994 toyota camry and airbag light turned on.
Maint. required light want reset.
you will go to the toyota dearler it good pleace
Replace the bulb that is burnt out.
It is reset with a OBD2 scan tool, after the repair of the system.
You have to find the reason why it came on.
Set the odometer to the trip A setting, turn off the car, then turn the key to the accessory position while holding down the trip reset button, this should turn it off.
lift the bonnet hey presto
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.
The check engine light is reset with a scan tool after repairing the failure that caused the trouble codes.
use a code reader to check the problem and it will reset the light, but if you do not fix the problem the light will continue to come back on.
To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem with the engine, the light is likely going to stay on. To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem with the engine, the light is likely going to stay on.
There is no real reset procedure. The problem needs to be diagnosed and repaired, when it is properly repaired the light will turn off by itself
Just disconnect the battery for couple minutes.
Toyota does not use inertia/reset switches.
turn on the head lights,press and hold the odometer and trip a trip b changer and then turn the key to ignition on but dont start the engine ang you will see the line flushing in the odometer screen and you are done
# Turn your ignition to the ON position # Press the Odometer reset button until the Trip A is displayed # Turn the ignition to OFF # Press and hold the Odometer # Turn the ignition back to ON # Hold the Odometer reset button until the odometer reads 000000 (it will count down from ------ to ----- to ---- etc) The Maint Reqd light should turn off at this time # Turn the ignition back off # If you want to verify that it worked, just turn the ignition back on This does not work on a 2006 Camry. Instead of Trip A, use the odometer display and follow the rest of the instructions.
disconect the negative battery terminal for about 5 min? that's what i do.
The maintenance required light requires a scan tool to be reset.