Want this question answered?
On the 4.7 liter 2007 Tundra: Put the trip odometer to "A" Trip. Then with key OFF, push trip odometer button and hold it. Turn key to "ON" but do not start the engine. The Odometer should flash a series of dashes. That's it, you are reset.
Make sure the odometer is set to odometer and not tripmeter. Stick the key in the ignition. Hold down the odometer reset button, turn the key to the on position(don't start the truck) and hold it until the lines are gone.. You will automatically see a few lines in the odometer that will start to go away. Once all the lines are gone, the counter has been reset. Make sure the odometer is set to odometer and not tripmeter. Stick the key in the ignition. Hold down the odometer reset button, turn the key to the on position(don't start the truck) and hold it until the lines are gone.. You will automatically see a few lines in the odometer that will start to go away. Once all the lines are gone, the counter has been reset.
Set the odometer to the trip A setting, turn off the car, then turn the key to the accessory position while holding down the trip reset button, this should turn it off.
This procedure is listed in your owner's manual. If you do not have one you need to get one. With the ignition off, push and hold the odometer reset button in. While holding the reset button in turn the ignition to the on position but do not start the engine. After 5 seconds the light will go out.
You need to let us know if it has a digital readout, or if it has the traditional mechanical odometer.
Press and hold the odometer reset button while at the same time turning the ignition to the on position without starting the vehicle. After about 5 seconds it will reset.
On the 2007 Camrys. To reset the Maint. light you must first make sure that the odometer is on Trip A. After that turn the key off, hold down the odometer button and turn the key to the ON position while holding the button. Dashes will come up on the odometer display and start to dissappear like a count down. After they dissappear, all zeros will appear and now the light is reset. On the 2007 Camrys w/ Smart key. Put the odometer on Trip A. Turn the car off, hold down the odometer button and without putting your foot on the brake, push the start button twice while holding down the odometer button and watch the display. It will speak for itself.
How do you reset the 'oil change required' message on 2007 Lincoln Town Car???
Just did it on my 2007. First make sure the trip odometer is set to Trip A. While holding in the odometer reset button, push to engine start button twice (but not with your foot on the brake pedal). After continuing to hold the trip OD button for about 4-5 seconds you'll see the Oil Maintenance Req'd message disappear. Sounds simple.
To reset the oil change lamp on a 2007 Town and Country, locate the reset button on the instrument panel. Hold the button down for 5 seconds.
o I want to reset the oil light on my 2007 mustang 6cyl.
No. You fill up and reset the trip odometer, when you hit reserve you check how far you have gone and get gas soon.