turn key to on but dont start the car make sure all doors are shut and then press the brake pedle three times
To reset the change oil light in a 2000 Oldsmobile Intrigue, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn the ignition off and back to the "ON" position to check if the light has reset. If the light is off, the reset is successful.
To reset the oil light in a 2002 Oldsmobile Bravada, first turn the ignition key to the "On" position without starting the engine. Then, press the accelerator pedal three times within five seconds. This should reset the oil change light. Finally, turn off the ignition and restart the vehicle to ensure the light is no longer illuminated.
Push the odometer trip reset till you get to "oil" then press and hold down till it reads "100"
To reset the change engine oil light in a 2003 Oldsmobile Silhouette, first turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within five seconds. After this, turn the ignition off, and then start the vehicle to ensure the light has reset. If the light remains on, repeat the process.
HOW DO YOU RESET OIL LIGHT ON CUD CADET
How do you reset the oil light on gmc c7500
It does not have a reset. If the oil light is on, the sensor has failed or the oil pressure is too low.It does not have a reset. If the oil light is on, the sensor has failed or the oil pressure is too low.
On my aurora, I just hold in the reset button.............
hold the engine reset button in until it resets
Reset the change oil light on Mazda 3
== == how do you reset the oil light on a1992 corvette
Have the problem repaired and they will reset the light. If you DIY then disconnect the negative battery cable for 5 minutes. If that does not reset the light you will have to have it reset with an OBD2 scan tool.