there are a couple possibilities, I have a 1995 Pontiac grandam that I just got reset. it has been working fine so far without the alarm chip attached.
the one that worked on my car was to turn the key to the on position for 10 minutes or more until the theft alarm system light stopped flashing. then it started just fine.
the next option was to turn key on for 10 and off then on for 10 3 times and on the 4th it should be reset.
or you can try opening passenger side door; closing it and use the key lock and unlock door 2 times.
or disconnect battery for 10 mins.
this are my possible solutions hope they help.
how do i replace a water hose in 1993 pontiac grand am
take it 2 the shop take it 2 the shop
A 1993 Pontiac Grand Am weighs approximately 2,828 lbs. The Pontiac Grand Am stopped production in the year 2005. The car was replaced with the Pontiac G6.
If you are on WikiAnswers trying to learn how to steal a car, I would suggest against it.
yes it will pontiacs are interchangable from the years 1993-1996
Does a 1993 Grand Am have air bags
To reset the alarm on a Corolla 1993, place they key in the ignition and turn it until it clicks. Keep the key in this position for 10 minutes and then start the car as normal.
If your 1993 Pontiac Grand Am will not shift into part, the transmission is probably seized up. The first step is ensuring the transmission fluid is not too low.
disconnect and reconnect the battery
The remote trunk release for a 1993 Grand Prix is in the gove box.
The camshaft sensor on a 1993 Pontiac Grand Am is located behind the rear bearing cap. It detects the position of the camshaft as it rotates and relays this information to the computer.
Contact the dealer.
Look in your owner's manual. put the key in the door
There is NO fuel reset button.What are you trying to do?Dean
Unhook your positive battery terminal for 5 minutes. Then use key in passenger side door (after you reconnect battery) turn left/right 2 times this should reset your factory settings.
on my 1993 jeep GCL i removed fuse 6 and 7 from the fuse box to disable my alarm i hope this helps
Either reset with a scan tool, or by unhooking the battery.
with the key lock and unlosk the front doors or the lift gate on the rear.
Check the temperature sensor
Usually against the passenger firewall
i don't now
How do I get my door panel off
if its lifted but if not no
It is behind the glove box