A possible way for the "do-it-yourself" type of person is to disconnect the battery - post cable clamp (negative side) for 5 - 15 minutes which clears the memory but also will leave a code for "battery supply to memory lost recently" in the memory; but it too will go away after a while. That is the only way to do it if you don't have a code reader that can communicate with the controller and its memory. Most codes will self-erase in 50-100 key on-off cycles once the cause that set the code is removed. You also will likely loose the radio presets by disconnecting the battery. So if the light isn't "on" all the time you might just leave the memory alone.
There are pages and pages of things that will turn the check engine light on. You need to have it checked for codes, and can diagnose from there.
You can use a scan tool or unhook the battery.
The engine check light on Chrysler town & country come on only when there is problem with any sensor Mal function which set off the engine check light. To reset this indication light read the OBD code and correct the corresponding problem. Once the cause of problem is corrected, than only OBR scanner will reset this service engine light can be reset.
With a scan tool.
You can not disconnect the check engine light.
The service engine or check engine light can be reset with a scan tool or by unhooking the battery. The light will return if the failure that caused the code is not repaired.
The service engine soon, or check engine, light is reset with a scan tool after repairing the cause of the trouble codes.
No. The check engine light comes on when the computer has detected a malfunction and set a code.
A flashing check engine light is an indication of a severe engine misfire.
The check engine light stays on when the engine computer has detected a malfunction and set a trouble code.
You need a scan tool to properly reset the check engine light.
The Chrysler Cirrus did not come out until 1995. You reset the check engine light with a scan tool or by unhooking the battery. If you have not repaired the cause of the code the light will come back on.