No such thing on this car.
General Motors cars do not have a reset switch.
You may have to change the sensor, it's a $9.00 part at autozone.
GM doesn't use fuel cut off switches. That's a Ford thing
You have to have a computer programmer module, from O'Reily's or Autozone to reset it. Some will let you do it and some say that they are not authorized to do it. Good luck...
you eat 25 corndogs ! :]
Unhook the car battery.
how do I set reset ignition security on a 1999 z34 monte carlo
RESET THE ALARM
The only thing you will have to reset is the clock and the radio presets.
Your owners manual will have all the info you need to do that.
Push and hold the HR or the MIN buttons
GM vehicles do not use inertia/reset switches.
unhook a battery cable for about 3 minutes and re-hook.
take it too the deleship and have them reset the computer or some times you can disconnect the negative batery termanal and hook it back up and it will reset it
Radio and computer will have to re-learn. But usually there isn't a problem.
Take it to a mechanic, and have them erase the codes. Auto zone and advance will not do it as they are not mechanics
turn the ignition key to the on position (don't start) and depress the accelerator pedal 3 times within 5 seconds to reset the light.
Chevrolet does not use reset switches.Chevrolet does not use reset switches.
Drive it for a few miles and see if it goes out, sometimes the computer has to reset itself.
Chevrolet does not use inertia/reset switches.Chevrolet does not use inertia/reset switches.
The light is on because there is a problem with the system. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself after a short drive.
how do you reset the clock on a 2005 Honda accord how do you reset the clock on a 2005 Honda accord