To reset the computer on a 2002 Ford Taurus disconnect the negative battery cable. Leave the battery cable disconnected for five to ten minutes. Reconnect the cable and start the car. The computer should be reset.
Disconnect your battery for over 1 hr and plug it back in.
You can reset the computer on a 95 Ford Taurus by connecting an OBDII reader to the vehicle. It can then reset all codes within the computer.
Remove one of the battery post cabes from the battery for 5 munutes. Now learn how to retrain the computer because it is reset and upset also at this time.
do you have to reset computer after changing battery in 2003 745li
If u are talking about reseting the computer, all u have to do is un plug the ground on the battery for about 15 min
There is nothing to reset. The computer will function normally when you connect the battery again.
You do not have to reset the computer.
To reset the computer on a 1992 Oldsmobile Cutlass Supreme, unhook the battery for about five minutes. Then reconnect the battery. If this does not work, look for the reset button on the computer and manually reset it.
There are a couple steps you can take when your 2002 Taurus alarm keeps going off. You can either disconnect the battery or bring your car to a professional to reset the computer in the car.
The computer only resets when the battery is removed. The alternator just charges the battery, so if the battery is left connected when the alternator is replaced, the computer should not reset.
There is nothing concerning the computer that needs to be reset.
this resets the computer in most cars. take the battery cables off the battery and touch them together your computer is reset.
disconnect the battery cables overnight and it should reset the computer
You can reset the computer with a scan tool or by unhooking the battery .
Unhooking the battery for five minutes will reset the computer.
No, you do not have to reset the computer. It will take care of itself.
You do not have to reset the computer. It will take care of itself.
You do not have to reset anything. but you should have the battery disconnected. and once you reconnect the battery it will reset your computer.
To reset computer on dodge caliber. remove the dodge caliber, remove the negative and positive cable from the battery. You can then reset your computer.
All you have to do is disconnect the battery for five minutes to let the power drain and the computer will be reset when you reconnect the battery.
Disconnect the battery for a few moments. When it is reconnected, the computer should have reset. if this method is not successful then the car will need to be taken to an authorized dealer to be reset.
vehicle will not start how do I reset the computer you don't need to
Not necessary. The computer will reset itself after a few driving cycles.
Disconnect the battery for a few minutes