To re-set Toyota Highlander 'maintenance required' dashboard warning light: Turn on the ignition and observe the odometer window. Ensure that it is set on the totalaccumulated mileage of the vehicle (NOT the trip meter). Turn off ignition. With the ignition off - depress the little plastic switch that changes the odometer to the trip meter and then while holding the switch in the depressed position, turn on ignition (it is not necessarry to start the car). Continue holding the swtich down for 5-10 seconds and you will see the odometer window flash back to zero. Release the switch and turn the ignition off, and it will be re-set for another 7,500 miles.
How do you reset maint read light on 2010 corolla
Maint. required light want reset.
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.
how to reset display screen after changing oil at 15000 miles. this is on a 2008 highlander.
With the ignition off, push and hold the trip reset button. While holding the trip reset button turn on the ignition and look for five dotted lines. When the five dotted lines disappear you can release the trip button and the maint reqd indicator will clear.
The answer is in the manual.
The maintenance required light requires a scan tool to be reset.
Hold down the "trip reset" button with the ignition off and keep it pressed while you turn the ignition on
read your owners manual
WWW.VEHIX411.COM free video instructionsEvery 5,000 miles an oil change indicator light that reads, "MAINT REQD" is automatically switched on in many new vehicles manufactured by Toyota and other auto makers. This light is not an emergency, but rather serves only as a reminder that it has been 5,000 miles since your last oil change. The MAINT REQD light is basically an oil change reminder.Of course, if you get your oil changed at the dealership, they will turn off the MAINT REQD light for you, but if you change your own oil, or go to a quick lube shop, you may be stuck with this oil indicator lit. Here is a very simple four step process that should turn off the MAINT REQD light for a majority of Toyota vehicles, and possibly other brands as well (before performing this procedure, please check with your owner's manual to make sure that the MAINT REQD light is described as an oil change indicator light):• Turn your ignition key to the 'ACC' or 'LOCK' position.• Press and hold the trip meter reset nob (next to your odometer).• While holding the trip meter reset nob, turn the ignition to 'ON', but do not start the car.• Hold the meter reset until the MAINT REQD light switches offOR YOU CAN WATCH A FREE VIDEO ON HOW ITS DONE GO TO WWW.VEHIX411.COM
Just found out that it must be reset at the dealership with a diagnostic computer