This procedure works for resetting the oil change reminder on most 2001, 2002, 2003, 2004, 2005 and 2006 Ford Explorer and Mercury Mountaineer vehicles that have the three vertically aligned buttons with "Info" on the top ,"Set up" in the middle and "Reset" on the bottom.
.
Close the door, turn the key on with engine off and wait for the chime to stops.
Press and release "Set up" until you see "Reset for system check".
Press and release "Reset" until you see "Oil life % Hold reset new"
Press and hold "Reset" until you see "Oil life reset to 100%"
You can change the light bulb by this method.
2002 ford explorer turn signals not working
i have a 2000 xls and the reset is above the speedometer
how do you remove all lug nuts from a ford 2002 xlt explorer
There isn't a reset, either the sensor, wiring, etc. is bad.
In the front passenger footwell , by the kick panel
have vehicle scanned with ABS scanner to determine the problem
That should be in the right front passenger footwell , by the kick panel
You might not be able to program your 2002 Ford Explorer remotes because you might not have turned the ignition to off and then run eight times. You must do this to reset the remote.
I believe the Explorer does NOT use a timing belt, but rather a timing chain
pay someone else to do it
Refer to owners manual