Want this question answered?
You just go to the Service and they will change the oil for you
how to reset the oil light on a 1997 mercedes e420
The service indicator light, in your Mercedes ML 270, can be reset by holding in the engine oil life button. The engine oil life will go to 100 percent. The service indicator light should go off.
The service indicator, on a Mercedes E 200, can be reset by scrolling to the oil life screen. From the screen hold down the scroll button until the percentage goes to 100 percent.
YES!!!!!!!!!!!
It is a basic service advisement, engine oil, lube, 3 filters (oil, air & cabin) and reset computer, and in Canada it means take it to the dealer because quicky lube does not service free recalls , extended warranties or forewarn you about possible upcoming issues the vehicle may incur.
If you reset oil life without changing the oil you will throw it off schedule.
no you wait till you it changed
Reset vw beattle
press the setup button until it switches to life, then press reset, if the oil life is already up press reset first then press setup until it switches to oil life, then reset again
The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL message being turned on, reset the system. Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the CHANGE OIL message, do the following: 1. Press reset stem till it Displays "OIL LIFE" on the DIC.(3 times) 2. Press and hold the reset stem. The oil life will change to 100% and a beep will sound. 3. Turn the key to LOCK. If the CHANGE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. Hope This Helps.
Press the fuel button until engine oil life appears on screen. Press and hold select button for five seconds. Oil life reset will appear on screen for 10 seconds. The system is then reset.