If you reset oil life without changing the oil you will throw it off schedule.
press the setup button until it switches to life, then press reset, if the oil life is already up press reset first then press setup until it switches to oil life, then reset again
The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL message being turned on, reset the system. Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the CHANGE OIL message, do the following: 1. Press reset stem till it Displays "OIL LIFE" on the DIC.(3 times) 2. Press and hold the reset stem. The oil life will change to 100% and a beep will sound. 3. Turn the key to LOCK. If the CHANGE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. Hope This Helps.
Press the fuel button until engine oil life appears on screen. Press and hold select button for five seconds. Oil life reset will appear on screen for 10 seconds. The system is then reset.
select oil life on the MID then press and hold reset for 10 seconds and oil life will reset to 100%. this is in owner's manual.
How do you reset the oil life light on Mercury Mariner? Dealer didn;t reset at oil change & we are out of state now. Thanks
Hold the mode button until display says someting like Oil life xx% press reset to renew. Hold reset button in until it says oil life 100%
Hold down both buttons where you get to the oil life function, and it should reset itself to zero.
You can reset the oil light by scrolling to the oil life display. Once on the display, hold the scroll button in until the oil life goes to 100 percent
1.Turn the ignition switch to the ON (II) position. 2.If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly until the multi-information reads oil life. 3.Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi-information display. 4.Select ''RESET'' by pressing the INFO ( / ) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to ''100.'' If you want to cancel the oil life reset mode, select ''CANCEL.''
when you have it on the message that says engine oil life xxx press and hold the clr button and it will reset back to 100%
Turn the ignition switch to the ON (II) position Press the Select/Reset knob repeatedly until the engine oil life is displayed. Press the Select/Reset knob for about 10 seconds, The engine oil life and the maintenance item code(s) will blink. Press the Select/Reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".