Set tires to proper pressure, check label on door jamb. Drive vehicle for ten minutes. If light is still on there is a sensor malfunction and you will need to take it to a service shop.
With an OBD2 scan tool.
A scan tool is required.
A Dodge Caravan does not have an inertia or reset switch.
The light will reset itself when the cause of the code has been repaired.
A Dodge Caravan does not have a reset switch.
Once you have repaired the cause of the light, it will reset itself.Once you have repaired the cause of the light, it will reset itself.
There isn't a reset. If all tires are inflated to 36 psi and the light is on, there is a failure and you will need to take it in for service.There isn't a reset. If all tires are inflated to 36 psi and the light is on, there is a failure and you will need to take it in for service.
you fix whatever is making it come on :-)
The only proper way is with a scan tool.
The light turns itself off if all tires are at the proper pressure (36 psi) and there are no sensor faults. If the light stays on, you will need to have the system checked for codes by someone with a scan tool.
A 2009 Dodge Caravan does not have a reset switch, the fuel system is computer controlled with relays.
The oil pressure low light can not be reset. The failure must be repaired. The oil change due light is reset like this. Turn key on, engine off. Press gas pedal to the floor three times. Cycle key. Light should now be off.