Want this question answered?
... what about it..?
To reset the tire pressure warning on an E200 Kompressor, use the dash menu settings. Scroll to the mileage menu. Open the Low tire pressure setting. Press the reset option.
Basically fix the problem with the brakes, check to see that the fluid is full and if it is you need to get the complete brake system checked out.
Yes
04 combo 1.7d. Hold mileage reset button and turn ignition to second setting (dash lights on), keep mileage button pressed for about 5 seconds until --- goes away, the service millage should reset.
Turn key on, turn cruise on, then off, then on again. Hit resume button 5 times, holding it down the 5th time. Light should reset. If not, a dealer will have to do it.
reset brake wear display on dash board after changed rear disk brake ?
To reset the dash cluster in a '96 Pontiac Grand Am remove both battery cables for 30 seconds. Wait for the theft lock icon to disappear then turn the car back on. The dash cluster should reset.
Make sure the brake fluid is topped off first as that will set off the light if it's low and if it's full try disconnecting the battery for about a minute to reset the light, if the light comes back on you need to see a mechanic.
To reset the dash light indicators on a Toyota Tundra the trucks ECU will need to be reset. The simple way of resetting the ECU requires disconnecting the battery for 5 seconds. When the ECU is reset the lights will be clear.
if trans shift is affected, then losing signal to PCM from trans if not affected then losing signal to dash or dash itself is problem use scanner to see if VSS is showing speed when dash does not
where is black reset button umder drivers dash