how to reset display screen after changing oil at 15000 miles. this is on a 2008 highlander.
To reset a check engine light for a Highlander 2003, disconnect the battery for 10 minutes. After this time, reconnect the cables.
There is nothing to reset except the radio presets and the clock.
Check the throttle position sensor (TPS)
I Believe Its Turn Ur Key To Acc Then Set Ur Odometer To Mileage. Turn Off Key Then While Holding Odometer Switch Turn Back To Acc . Itll Blink Then Reset. That's How U Do It On An 05.
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
I found a reset button under the dash board. You may want to look there first.
check the manual
Inflate the tire. If that doesn't do it, you might have something wrong with the TPS.
This is basically an "oil change reminder" light. Check your manual on how to reset it.
On the 08 highlander make sure that your ODO display is on trip A then turn off your key, hold down the trip reset button and with your other hand turn the car to on. the display will flash to a series of either 0's or dashes, they will then countdown to nothing. When the display goes blank the reminder is reset. Since it is reset now do not rely on it for a monitor since it will come on 5k after being reset.
Inside the tires, most likely mounted to the valve stem :-)