How do you reset warning light for brakes BMW 2005 325ci?
The brake warning light on a 2005 BMW 325i can be reset by connecting an OBD II code reader. It can view and clear error codes detected by the computer.
Take it to the stealership and get your brakes checked
You can reset the brake warning lights, on your VW Jetta, by backing up 20 feet and using the brakes. The automobile will sense the new pads and the warning light will go off.
Take your auto to your local Merc Shop and they should be able to reset your cpu for free.
If your brake warning light is on, and for reasons that you are not aware of, you should NOT be driving this vehicle. If you know what is causing the brake warning light to come on, have remedied the problem, but the warning still persists, then you will have to take your car to a shop that is equipped for working on these brakes. And if the car is equipped with traction control/anti-lock brakes, the… Read More
how to reset a srs warning light on 307 203 model
NEVER reset ANY brake pad warning lights. It is ALWAYS safer to get a NEW set of pads. If your brakes fail, you may end up killing yourself or an innocent person. THIS is the best advice my friend
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
How do you reset the Airbag warning light on a 1995 Toyota Avalon?
Once you correct the problem the light will go off. Can be low of brake fluid, parking brake might be partially on, defective Master Cylinder, etc. Do not ignore this light as this can cause your brakes to fail.
How do you reset the brake pad warning light for a 2005 c320 mercedes benz?
If you mean that you have a warning light on, then once the problem that is causing the airbag warning light to come on is diagnosed and fixed, the light will reset itself.
Reset the battery
How do you reset the oil service warning light manually on a 2003 BMW 525i?
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
how to reset abs warning light on 2000 gmc Yukon
It will be reset by the professional that repairs it.
The warning light is on because there is a problem with the system. Until the problem is fixed the light will remain on and the system will not operate if needed. Once the problem is fixed the light will reset itself.
how do you reset a 2008 kia spectre tpms light?
how do you reset brake warning light 0n 745li bmw
how to reset vw golf brake light
How do I reset oil indicator on bmw 325 1987?
What warning light? The only warning lights that can be reset are the Maintenance Required and Check Engine Light. The Maintenance Required light is reset in different ways depending on model and year. The procedure is listed in your owner's manual. Reset the light after performing scheduled maintenance listed in your owner's manual, usually oil/filter change. The Check Engine light is reset by repairing the problem then unhooking the battery for 15 minutes, on a… Read More
You can reset your Chevrolet 2500 pickup truck airbag warning light by removing the airbag warning light fuse. Keep the fuse out for 10 seconds and replace it to its original slot.
The timing belt warning light, on a Toyota Innova, can be reset by removing the timing belt warning light fuse. Leaves the fuse out for 10 seconds and put it back in.
Depends on what warning light you are asking about.
Press the reset button
The best way to reset the engine warning light on a Nissan Primera p12 would be to take it to a mechanic. It is best to have a mechanic check it out to make sure nothing is wrong that could malfunction and put someone in danger. The mechanic will be able to reset the engine warning light.
how to reset the vigo timing belt warning light
To reset the airbag warning light on a Volvo V40, you must take the vehicle to the dealer. The dealer will check the airbags and turn off the light using a specific tool.
How can you reset the dash light blinking light on a 528 BMW after all bulbs have been replaced and reset the brake warning light after new brakes have been installed?
if it is your brake light blinking then you may need to check the rest of your braking system ,, ie. fluid level,pressure switch, and wear sensors... Turn your ignition key to position 2 (do not start the car). Wait approximately 45-60 secs. and it should reset the yellow dash light.
Reset air bag warning light Nissan almera tino? Read more:http://wiki.answers.com/Q/Reset_air_bag_warning_light_Nissan_almera_tino#ixzz2QRX6Yw3B
Reset the exhaust emission warning light by turning the ignition on and off 40 times. Light codes can be read by the old brake/accelerator press and turn the ignition on.
how can i reset rear brake pad warning light on 2006 bmw 525i
There is no reset for the battery (charging system) warning light. It is on because there is a problem. Once you repair the problem the light will go out. More than likely the alternator has failed.
get your brakes fixed....
By having a professional repair the problem that has set the warning light in the first place.
One can reset the brake warning light on the discovery 3 by resetting one's brake pads to the original manufacturer's settings and checking if they have been worn through.
The air bag warning light is on because the air bag system has detected something is wrong. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself.
how do you reset the low tire pressure warning light on a 2009 camry
You have a problem with the brake system. Once you repair the problem the light will reset itself.
Depends on the warning lamp. Consult your local dealer.
To reset the oil warning light on a 2008 Chrysler Sebring, turn on the ignition without starting the engine. Slowly push the accelerator down three times. Next, turn the ignition to the lock position and the warning light should be gone.
The only way to reset the low tire pressure warning light is to remove or replace the low tire pressure sensor. When the sensor is not working properly the light will remain on.
If the warning lights go off in a Chevy Tahoe, it indicates a problem. In order to reset these lights the problem must be solved.
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.
By fixing the problem which is causing the light.
hold milage reset button in and switch on ignition.hold for about 5 seconds and it will reset.
To reset the overhead warning light, hold the SELECT and UNITS buttons on the trip computer for 5 seconds. The service interval light will be illuminated and then extinguish after approximately 4 seconds.
According to the repair manual: Remove the grommet from the speedometer and turn off the lamp by pushing the warning light reset switch, then replace the grommet.
If you undo the negative (Black) lead from the battery terminal and leave the car for 15 mins then put it back. This should reset the memory clearing the warning light. Regards James