its in your owners manual, you hold down the odometer button for several seconds if i remember correctly
Turn the 4Runner on, make sure that you are looking at the "odometer" miles and not the "Trip" miles. Turn the 4Runner off, hold the "reset" button, turn the 4Runner On and the "MAINT" light will blink 3 times. Release the "reset" button and the light will turn off. This worked great for me but the light flashed 5 times then went off. 2007 SR5 4WD 16,000 miles recently purchased from dealer hopefully there is nothing else wrong/ FYI the manual told me that the maint light is for oil change.
How do you reset maint read light on 2010 corolla
http://wiki.answers.com/Q/Toyota_rav_4_maint_required_light_2008"
Maint. required light want reset.
its the same, you have to follow the instructions to the letter! ________________________________________________ Make sure trip meter is on total mileage window. Turn key to off ign While pushing down and holding on the reset/trip button, turn the ign to on position MAINT light will flash a couple of times and turn solid again, turn key to off position Turn the ign to on position and the MAINT light should be off now.
After your oil change is done , make sure your odometer is set to the numbers and press & hold the button you will see the "MAINT" light flash several times and then stop , the turn vechile on the light should be gone . For older models of Toyota make sure to have it set to trip "A" press and hold you will see 5 dashes as you hold the will disappear one at a time when all are gone the light should be off.
WWW.VEHIX411.COM free video instructionsEvery 5,000 miles an oil change indicator light that reads, "MAINT REQD" is automatically switched on in many new vehicles manufactured by Toyota and other auto makers. This light is not an emergency, but rather serves only as a reminder that it has been 5,000 miles since your last oil change. The MAINT REQD light is basically an oil change reminder.Of course, if you get your oil changed at the dealership, they will turn off the MAINT REQD light for you, but if you change your own oil, or go to a quick lube shop, you may be stuck with this oil indicator lit. Here is a very simple four step process that should turn off the MAINT REQD light for a majority of Toyota vehicles, and possibly other brands as well (before performing this procedure, please check with your owner's manual to make sure that the MAINT REQD light is described as an oil change indicator light):• Turn your ignition key to the 'ACC' or 'LOCK' position.• Press and hold the trip meter reset nob (next to your odometer).• While holding the trip meter reset nob, turn the ignition to 'ON', but do not start the car.• Hold the meter reset until the MAINT REQD light switches offOR YOU CAN WATCH A FREE VIDEO ON HOW ITS DONE GO TO WWW.VEHIX411.COM
Hold down the "trip reset" button with the ignition off and keep it pressed while you turn the ignition on
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.
turn key to on without cranking the engine then press the trip meter lever for a few seconds until the meter reads zero
turn key to on without cranking the engine then press the trip meter lever for a few seconds until the meter reads zero
i think you have to push in the tripometer turn on ignition and then wait second, turn off the ignition and turn back on i did it once but cant remember all of it