Want this question answered?
The correct spark plug for a Stihl 024 is an RCJ6Y (Champion), BPMR7A (NGK), or a WSR6F (Bosch). Make sure that the gap is set to 0.020 inches.
Chainsaw carbs are very picky and have to be set just right. As you are obviously not familiar with them, you should take it to you local lawnmower and small engine shop.
Bosch 7547 or better Bosch WSR6F. Also good results with NGK BPMR6A. Gap set at .020 to .025 for hot spark.
You can use the same flywheel but need to put in a complete solid state ignition set up. http://store.chainsawr.com/
In Texas.
hi to change the cord on a still saw is abit tricky as there is coil spring in side you have to set it up so that when pulled it will recoil its self take it to atool hire shop they will sort it in 1hr at a price of £10-£15 POUNDS no hasstle
turn both hi and low fully clockwise till seated. then turn each 1 full turn counterclockwise then adjust your idle speed with idle set screw.
the chain saw was invented in Germany that's true here's more It took a "village" to create the machine we call the chainsaw. Around 1830 German Dr. Bernard Heine invented the osteotome, a chainsaw-like tool powered by a winder had links of a chain carrying small cutting teeth with the edges set at an angle. Then in 1861, the Hamilton saw that was hand-cranked by one or two men and looked like a spinning wheel is invented. Then in the 1880s a riding saw that resembled a rowing machine that workers could sit on was invented. Then in 1926 Andreas Stihl patented the first electric-powered cutoff chain saw. In 1927 Emil Lerp developed the first gasoline-powered chainsaw. In 1929 Stihl invented his own version of the gasoline-powered variety and began mass-production. In 1948 Joseph Cox invented the Oregon chain with interlocking links, a product so popular he founded the Oregon Chain Co. and mass-produced them. Then in 1960, the Oregon Company released the Homelite chainsaw series, the first truly portable chainsaw.
It should be preset from the factory
how to set the valve timming on a nissan 1400
Should be set at 0.015" to 0.016" gap
If you can see the figure '025' on the girdle of a diamond, it may be an indicator of origin. If you can see the figure '025' on metal where the diamond is set, it may be an indicator of the metal purity or model number. You can determine the weight of a diamond by weighing it, which is most reasonably done by a certified gemologist who removes the gem from its setting.